Dremel DigiLab 3D40 Flex 3D printer
Print parts quickly in up to 300 micron resolution, or in high quality in 100 micron resolution.
Extruder: Single extrusion
Extruder temperature: Up to 230°C /397°F
Operating Interface: 3.5” full color IPS touch screen
Maximum Build Volume: 254mm x 154mm x 170mm mm
Layer Thickness: 4 mil | 0.004 inches 100 microns | 0.10 mm
USB Stick: Up to 8GB
Internal Storage: 4GB
Extruder: Single extrusion
Extruder temperature: Up to 230°C /397°F
Operating Interface: 3.5” full color IPS touch screen
Maximum Build Volume: 254mm x 154mm x 170mm mm
Layer Thickness: 4 mil | 0.004 inches 100 microns | 0.10 mm
USB Stick: Up to 8GB
Internal Storage: 4GB
Opening hours
- Today:
10:00 to 14:00
Location
199 Colonnade Road S
Ontario - Ottawa (ON)
Ontario - Ottawa (ON)
Categories
HomeAll Products